Katalóg DIRAK

Eject and Turn T-Handle FS/RS


Advantages ■■ For flat- or round rods.

Materials ■■ Dish, T-handle: zinc die, black ■■ Flat rod and rod stub: steel, zinc plated ■■ Padlock bolt: stainless steel AISI 304 ■■ O-ring: NBR, black Remarks 1. Stroke 24mm [0.945] 2. Position of the spacer if used outside the sealed area 3. Position of the spacer if used

■■ T-handle with 90° swiveling and 135° rotatable T-handle element. ■■ Complies with security test to RCII DIN 1630. ■■ IP65 according to DIN EN 60529. ■■ Very narrow gap dimension. ■■ The flat design prevents the handle from being used as a climbing aid. ■■ The locking cylinder can not be forced inwards by axial forces. ■■ The T-handle can not be folded down if not in line with the housing. ■■ Separate locking device sub unit. Suitable for: Euro cylin der, KABA cylinder, insert and/ or padlock. ■■ Application inside or outside the sealed area. ■■ RH/LH application. ■■ Consention water drainage.

inside the sealed area 4. Closed and locked 5. Open cover

Multi-Point Systems

Multi-Point Systems

6. Turn key: T-handle ejects 7. T-handle can be operated


Part Number

Opening angle


Cylinder cover


Installation outside the seal

Installation type

a) b) c) d)

302-9001.00-60000 302-9001.00-30000 302-9001.00-50000 302-9001.00-20000

90° 90° 90° 90°

24 mm 24 mm 24 mm 24 mm

Yes Yes Yes Yes

Yes Yes Yes Yes

screw-on screw-on screw-on screw-on




385 211-9003.00-00000 Profile-Cylinder 385 211-9004.00-00000 Profile-Cylinder

352 |

Multi-Point Systems


| 353 Multi-Point Systems

Made with FlippingBook flipbook maker