Katalóg DIRAK

Dual Cylinder Swinghandle RS 105, RC II

[2-126.01]

Advantages ■■ Dual Cylinder Swinghandle with pivotable operating lever. ■■ Complies with security test to DIN EN 1630 RCII. ■■ Two profile-cylinders with length of 40 and / or 45mm, allow opening by each cylin der without unlocking the other one. ■■ The handle can be locked without using a key. ■■ Vibration-proof according to DIN EN 61373. ■■ IP65 according to DIN EN 60529. ■■ Including steel insert (saw protection). ■■ To use the same door both RH and LH, 2 holes ò 46, symmetrical to door center are possible. ■■ Logo (1.) on handle on request.

Materials ■■ Swinghandle and dish: zinc die, ZL 0430, black ■■ Other surfaces on request! a), b) and d) ■■ 3- and 2-point cam and round rods: steel, zinc plated e) ■■ Adapter: zinc die, zinc plated f) ■■ Rod guide: PA, black g) ■■ Square adapter: PA, black g1) ■■ Flat external seal: sponge rubber, pure h) ■■ Building key: PS, black

Swinghandles

Swinghandles

Dual Cylinder Swinghandle RS 105, RC II Part Number Internal cover

Material cylinder cover

Sealable

Stroke

Installation type

ò 46

a)

207-9614.00-00000

zinc die

Yes

18 mm

screw-on

Accessories

d) 300 2-140 Profile-Cylinder DIN 18252 f); g) 281 1-181.01 Adapter zinc die for Round Rods f); g) 280 1-181 Adapter PA for Round Rods e); h) 278 1-170 Round Rod with Eye

e); h) 279 1-180 Round Rods for Adapter g) 284 200-3623.51-00000 Rod guide g) 284 200-3625.51-00000 Rod guide

759 204-0301.00-00000 PZ building key b) 290 207-9522.00-00000 3-point cam b) 290 207-9528.00-00000 3-point cam c) 290 207-9599.00-00000 2-point cam h) 207-2702.03-00000 Adapter for cutout ò 46mm h1) 207-2803.00-00000 Gasket for adapter ò 46mm

254 |

Swinghandles

www.DIRAK.com

| 255 Swinghandles