Katalóg DIRAK

NT Swinghandle RS PrC Stainless Steel

[7-066]

Advantages ■■ Flush design. ■■ Extremly narrow gap. ■■ The flush design prevents this swinghandle being used as climbing support. ■■ Locking cylinder fitted in the dish and protected against being forced through. ■■ Bolted internal cap is made of stainless steel. ■■ IP65 according to DIN EN 60529. ■■ 135° Swing. ■■ Stroke 35mm(1.378) by 3-point cam adapter 45°. ■■ RH / LH application. ■■ Cylinder cover optional screw down.

Materials ■■ Swing handle, dish, cap, rotating disk: stainless steel AISI 316L ■■ Cap sealing and o-ring: NBR ■■ Washer: PTFE- Teflon ■■ Spring: stainless steel AISI 301 ■■ Locking bolt: stainless steel AISI 316 ■■ Screws, grooved pin, pin with axial knurl and nut: stainless steel

Swinghandles

Swinghandles

Swinghandle for profile cylinder Part Number

Version

Stroke

Installation type

a) b)

307-9302.00-00000 307-9305.00-00000

35 mm 35 mm

screw-on screw-on

cover screw down

Accessories

f1) 281 1-181.01 Adapter zinc die for Round Rods f) 280 1-181 Adapter PA for Round Rods e) 282 7-106 Round Rods Stainless Steel c) 162 7-105 Cams L35/45 Stainless Steel d) 296 7-106.01 Cam Adapter 45° Stainless Steel

g) 284 200-3623.51-00000 Rod guide g) 284 200-3625.51-00000 Rod guide

301 211-9004.00-00000 DIRAK Profile-cylinder 301 211-9003.00-00000 DIRAK Profile-cylinder

238 |

Swinghandles

www.DIRAK.com

| 239 Swinghandles