Catalog DIRAK

Pull Latch Handle

DST Pull Latch Handle

[1-068]

[1-069DST]

Advantages ■■ The Pull latch handle is used by 19" engineering for locking insertions. ■■ The completely pre-assem bled unit is fastened by a countersunk screw M4. ■■ LH and RH application. ■■ When inserting the plug-in unit the free running slam hook latches into the appropriate cutout and locks the plug-in unit with the frame. ■■ Drawing at the handle unlocks the plug-in unit and it can be pulled out by the handle. ■■ The countersunk screw is not included.

Materials ■■ Housing and handle: zinc die, matt chrome plated ■■ Spring for insert: spring steel ■■ Hook: sintered steel, zinc plated Remarks ATTENTION: (S) max. 5mm [0.197] 1. cutout handle 2. cutout for locking hole 3. locked 4. unlocked

Advantages ■■ The pull latch handle with DIRAK-SNAP-Technology is used by 19" engineering for locking insertions. ■■ Tool-less installation. ■■ RH and LH application. ■■ When inserting the plug-in unit the free running slam hook latches into the appropriate cutout and locks the plug-in unit with the frame. ■■ By tilting the handle, the hook is withdrawn from the cutout and the plug-in unit can be pulled out.

Materials ■■ Housing and handle: zinc die, matt chrome plated ■■ Spring for insert: spring steel ■■ Snap wedges: sintered steel, zinc plated ■■ Hook: sintered steel, zinc plated Remarks 1. The bulge in the cutout is always opposite of the bolt. This cutout guarantees a unique and constant fitting. 1. bulge for correct positional installation

2. cutout door 3. cutout frame 4. pushing in 5. locked 6. unlocked

Latches

Latches

Pull Latch Handle Part Number

Pull Latch Handle Part Number

Installation type

Clamping range

Installation type

280-9101.00-00000

screw-on

480-9002.00-00810 480-9002.00-01113 480-9002.00-01416

0.8 - 1.0 mm 1.1 - 1.3 mm 1.4 - 1.6 mm

tool-less tool-less tool-less

408 |

Latches

www.DIRAK.com

| 409 Latches