Katalóg svietidiel LABRA 2022

multisystem

48V

230V

230V input

Wires lenght from driver to end feed — A B — Max. profile lenght, from end feed to end of main profile.

max. 20m cross-section 1.5mm

cross-section 1.5mm + driver 75W — 40m max system lenght cross-section 1.5mm + driver 150W — 20m max system lenght

Electric diagram DALI2

Electric diagram On-Off

multisystem Track / End feed

multisystem Track / End feed

48V

DA

48V

+

–

+

–

+

–

48V power supply

48V power supply

48V Driver

48V Driver

wires for DALI2

230V power supply

230V power supply

L N

L N

DA+ DA

Technical info 48V

Choosing a driver

Max. working temperature: 70°C Ambient temperature: 25°C Voltage: 0-60V DC Class III, SELV

LABRA recommends using the 48V drivers listed in this catalog, but it is not forbidden to use other 48V power supplies, provided the technical conditions are met.

For trouble-free operation of the system, we recommend that the fittings used do not exceed in total 90% of the power supply used, e.g.

The system is designed to be used ONLY under safe voltage> 60V DC. On-Off power supply takes place with two wires, while power supply and DALI2 dimming requires 4 wires (2 power 48V + 2 control DALI2) Dimming control requires the simultaneous use of one of the 48V power supplies + DALI2 gate and luminaires marked as DALI2 versions - each luminaire can be addressed separately.

1.

Driver 75W | Line In 567 12W x 5 szt. = 60W Driver 150W | Line In 567 12W x 11 szt. = 132W

2.

128