katalóg LABRA 2022

light thinking

7.2213EG End Cap (hole dia.10)

9.2234 / 9.2235 / 9.2236 / 9.2237 Driver WP

7.2249EG Corner connector - Flexible

7.2210EG End Feed

7.2224EG Shift In 5x1

7.2226EG Line In 286

7.2203EG Track WP 200cm

A flush angle connection requires a 90° angle joint element – these are separate elements for NT and WP profiles. IMPORTANT : the length of the side of the angle joint is 100mm, but after plastering, the visible part of the profile is only 77mm. Make sure to take this into account when designing your line length! The WP driver must be placed on the ceiling. Remember to place it close to the inspection opening. The ceiling-to-wall angle joint is created by butt jointing two WP profiles together. No additional mechanical coupling is required. Be careful not to bend the profile inwards when plastering – this will make it impossible to mount luminaires etc. Make sure to read the installa tion instructions! The WP profile needs to be fixed on a mounting frame. The ceiling needs to be thoroughly plaste red and painted after the installation.

7.2220EG Stik On 25x1

7.2212EG Corner connector

7.2484EG Corner Joint 90° WP

127