katalóg - LABRA 2020

134

MULTISYSTEM Driver

48V & DALI output 2 wires

230V & DALI input 4 wires

A

B

max. 20m cross-section 1.5mm

cross-section 1.5mm + zasilacz 75W — 40m max długość systemu cross-section 1.5mm + zasilacz 150W — 20m max długość systemu

A wires lenght from driver to end feed

B The maximum length of the MULTISYSTEM profile, from the end feed to the end of the profile.

Technical info 48V

Choosing a driver

The system is for use ONLY under safe voltage> 60V DC.

Tc: 70 ° C Ta. : 25 ° C

LABRA recommends using the 48V drivers listed in this catalog, but it is not forbidden to use other 48V power supplies, provided the technical conditions are met.

The power supplies and converters used in the system are based on TRIDONIC's patented DC-String technology. Power supply and control (in DALI version) takes only 2 wires, DALI signal is implemented in 48V power supply Dimming control requires simultaneous use of the DALI driver and fittings marked as DALI versions, each luminaire can be addressed separately.

Current: max. 15A Voltage: 0-60V DC III, SELV

For trouble-free operation of the system, we recommend that the fittings used do not exceed in total 90% of the power supply used, e.g.

1.

Driver 75W | Line In 567 12W x 5 szt. = 60W Driver 150W | Line In 567 12W x 11 szt. = 132W

2.

7.2210 . End Feed 48V

electrical 7.2210 . End Feed

Despite its name, this element can be mounted anywhere along the profiles, because it has two entries for the power cord - at the bottom and at the back of the body In each profile (surface / suspended / recessed) you can make a hole (max.fi8) through which the power cord passes - be careful not to damage the body and wires in the rail.

main component 7.2200 / 7.2201 . Surface profile

electrical 7.2210 . End Feed

main component 7.2202 / 7.2203 . Recessed profile