katalóg - LABRA 2020

133 WP system

7.2213 End Cap (hole fi10)

The WP profile needs to be mounted on a mounting frame, The ceiling requires thorough plastering and painting after assembly. Be careful not to bend the profile inwards during plastering - this will prevent mounting of any luminaires etc. Read the assembly instructions!

9.2234 / 9.2235 / 9.2236 / 9.2237 Driver WP

The WP driver must be placed on the ceiling. Remember to place it near the inspection hole.

7.2249 Angle Joint Flexible

7.2210 End Feed

7.2224 Shift In 5x1

7.2226 Line In 286

7.2203 Track WP 200cm

7.2220 Stik On 25x1

7.2212 Corner Joint

7.2484 Angle Joint 90° WP

Angular connection in one plane requires a separate element - a 90 ° angle connector - they are separate elements for NT and WP profiles. IMPORTANT : the length of the side of the angle connector is 100mm - however, after plastering - the visible dimension of the profile is only 77mm. Be sure to consider this when designing the length of the line!