katalóg - LABRA 2020

132 NT system

7.2214 End Cap (No hole)

Angular connection in one plane requires a separate element - a 90 ° angle connector. Theses are separate elements for NT and WP profiles

Remember the end caps. For NT / WP profiles the power cord can be inserted through the hole in the bottom of the profile. End cap with a hole fi10 will be useful if the power supply cord enters at the end of the profile, e.g. for suspended profiles.

7.2215 Angle Joint 90° CeilingNT/ZW

7.2460 Stik On 35x2

7.2222 Shift On 3x1

7.2212 Corner Joint

7.2249 Angle Joint Flexible

7.2201 Track NT 200cm

7.2470 Line In Points 286

7.2210 End Feed

Power supply driver box can be mounted at any end of the system. It must be connected to the end feed supply via wires. Each box is equipped with a suitable driver - check the catalog numbers.

9.2462 / 9.2463 / 9.2464 / 9.2465 Driver + Box NT